26 ft
electric scissor
lift rental
Genie GS-2632, Skyjack SJIII 3226 or similar. Still 32 in wide, so it goes through the same doors as the 19, but it puts you 7 ft higher. The step up most crews take when a ceiling turns out taller than they measured.
Rates don't include delivery, the 15% damage waiver or tax. See your out-the-door price with a quick quote. Delivery is required and billed each way.
7 more feet through the same doorway
At 32 in wide the 26 matches the Skyjack 19 and is only 2 in wider than the Genie GS-1930, so any door or hallway wide enough for the smaller machine is wide enough for this one too. It is longer and taller folded, so check freight lifts and low doorways. The platform rating does drop slightly, to 500 lb.
That combination makes it the safe default for low bay warehouse, big box retail and anywhere the ceiling sits between 25 and 32 ft. You are not guessing at reach and you are not giving up access.
It is longer and heavier than the 19 at 91.5 in and 4,135 lb, so check the floor rating and the turning room before you commit.
Rent it for ceilings between 25 and 32 ft
- Big box retail and low bay warehouse
- Lighting retrofits above racking
- Ductwork and diffusers
- Sprinkler mains
- Sign and banner hanging
- Plant maintenance
Genie GS-2632, Skyjack SJIII 3226 or similar
Model level specs| Make and model | Genie GS-2632, Skyjack SJIII 3226 or similar |
|---|---|
| Platform height | 26 ft |
| Working height | 32 ft |
| Platform capacity | 500 lb |
| Max occupants | 2 |
| Overall width | 32 in |
| Overall length | 91.5 in |
| Stowed height | 84.7 in |
| Extension deck | 3 ft |
| Operating weight | 4,135 lb |
| Power | 24V DC electric |
| Tires | Solid rubber, do not mark floors |
| Surface rating | Firm, level slab only |
Which term to book
The day rate is $170 and the week is $350, so the week costs about what 2 days and a bit would. Past 2 days on site, the week is the cheaper booking every time.
The 4-week rate of $692 is just under 2 weeks, which is why longer fit out jobs almost always take the month.
Included with every rental
- A current annual inspection, with the operator manual riding in the machine
- A full function check before it leaves the yard, so nothing surprises you on site
- A phone number that reaches the yard directly rather than a call center
Will it fit? 4 things decide it
Measure before you bookDoorway width
32 in wide, no wider than the widest 19, so it clears a 36 in commercial door. Measure the tightest point on the route rather than the entry door alone.
Door and ceiling height
It stands 84.7 in folded, which is about 7 ft 1 in. That is taller than the 19 and will not clear a 7 ft door, so check every threshold on the way in.
Floor load and surface
At 4,135 lb it is over half a ton heavier than the 19. Confirm the floor rating before you elevate on a mezzanine, a second story or over a vault.
Turning and length
91.5 in long, so it needs more aisle to turn than the 19 does. Racking aisles and tight corridors are worth measuring twice.
Capacity drops a step from the 19. The 26 carries 500 lb on the platform against the 19 at 550 lb, so a 2 person crew with material can hit the limit sooner. Weigh what is going on the deck.
Send us a photo of the access route and the ceiling and we will tell you whether the 19 would have done the job for less.
Battery and charging
Same electric drivetrain as the rest of the range, so there is no fuel charge and nothing to refill. It arrives charged with the charger on board.
A full charge covers a normal indoor shift. Heavy driving between bays runs the pack down faster than lifting does, so plug it in every night.
Operator rules
OSHA treats a scissor lift as a mobile scaffold under 29 CFR 1926.451, with operator training under 29 CFR 1926.454 and ANSI A92.22 and A92.24.
- Your employer trains and authorizes the operator and keeps a written safe use program on site.
- Inspect the machine and run a function test at the start of every shift.
- Rails up and gate closed is the fall protection. Never climb the rails or stand on the toe board.
- Do not exceed 500 lb on the platform, and remember the extension deck is rated lower.
- This machine is not insulated, so keep clear of energized lines.
Work out the estimate total
Put in the ZIP the machine is going to and how long you need it. The delivery band and the estimate total come back straight away, waiver, fuel and tax included.
| Rental, 1 day | — |
|---|---|
| Damage waiver, 15% | — |
| Prepaid fuel | — |
| Delivery out, enter a ZIP | — |
| Pickup back | — |
| Sales tax, 9.1% | — |
| Estimate total | — |
About this figure. The total carries the 15% damage waiver, prepaid fuel and 9.1% sales tax. This is an estimate rather than a quote, and we confirm the band from the full address before anything is booked.
Zones and rates
Delivery is required on this machine and billed each way at the mid size tier.
| Distance | Each way | Round trip |
|---|---|---|
| 0 to 20 mi | $95 | $190 |
| 21 to 30 mi | $125 | $250 |
| 31 to 40 mi | $175 | $350 |
| 41 to 50 mi | $225 | $450 |
Past 50 mi, call us and we will quote the run to your address. Deliveries go out Monday to Friday between 3 and 11 a.m., and same day is possible when the machine is sitting on the yard. Have it ready for pickup before 7 a.m. on the day that it goes back to us.
Where we deliver
Common questions
What size scissor lift do I need for a 30 ft ceiling?
The 26 ft machine reaches about 32 ft of working height, which covers a 30 ft ceiling with a margin. Working height is platform height plus roughly 6 ft of operator reach, so do not size off platform height alone.
Is the 26 any wider than the 19?
Barely. The 26 is 32 in across, the same as the Skyjack SJIII 3219 and 2 in wider than the Genie GS-1930, so measure for 32 in and either size will fit. The difference is length, height folded and weight.
How much weight can the platform hold?
500 lb, which is 2 people with hand tools and light material. The rollout extension deck carries less, so ask when you book if you plan to load it.
Can I use it on a mezzanine?
Often, but the machine weighs 4,135 lb and the load under each wheel is much higher than that spread evenly. Get the floor rating from the building owner first.
Related equipment
All scissor liftsGenie GS-1930, Skyjack SJIII 3219 or similar, just 30 to 32 in wide, so it rolls through a shop door and into a finished building without marking the floor.
Daily rate $143 Scissor lifts 32 ft electric scissor liftGenie GS-3246, Skyjack SJIII 4632 or similar.
Daily rate $242 Scissor lifts 40 ft electric scissor liftGenie GS-4047.
Daily rate $260Ready to book?
You can reserve it online in about 2 min, or call the yard and we will put it straight onto the schedule.
Or talk to a Summit representative
Tell us the job, the access route and the ground conditions, and we will tell you whether this is the right machine before you pay for it.
Call (602) 900-1845