Serving the greater Phoenix areaMon to Fri · Deliveries 3 AM to 11 AM · Store hours 6 AM to 3 PMDeliveries 3 AM to 11 AM · Store 6 AM to 3 PMDeliveries 3 AM to 11 AM(602) 900-1845
Aerial work platforms · Scissor lifts

19 ft narrow
electric scissor
lift rental

Genie GS-1930, Skyjack SJIII 3219 or similar, just 30 to 32 in wide, so it rolls through a shop door and into a finished building without marking the floor. It gives you 25 ft of working height, on battery, indoors and quiet.

Daily rate$143
Weekly rate$287
4-week rate$674

Rates don't include delivery, the 15% damage waiver or tax. See your out-the-door price with a quick quote. Delivery is required and billed each way.

19 ftPlatform height
30 to 32 inOverall width
550 lbPlatform capacity
80 inStowed height
24VElectric, no exhaust
Why the narrow one

It fits through the door you already have

At 30 to 32 in wide, depending on the model, and 80 in tall folded, it clears a 36 in door, fits most freight lifts and turns inside its own footprint, which is the whole reason to take it over a taller machine.

Batteries and solid rubber tires let it work inside an occupied building, with no exhaust and no marks on a finished floor. It is quiet enough to run through a tenant's business hours.

If the floor is dirt or graded, or something sits between you and the work, then this is the wrong machine and you want a boom lift instead.

What people rent it for

Rent it when the work is straight overhead on a flat floor

  • Light and power work
  • Heating and cooling service
  • Fire sprinkler work
  • Ceiling grid and drywall
  • Retail fit out and signs
  • Warehouse racking

Genie GS-1930, Skyjack SJIII 3219 or similar

Model level specs
Make and modelGenie GS-1930, Skyjack SJIII 3219 or similar
Platform height19 ft
Working height25 ft
Platform capacity550 lb, 2 people with tools
Overall width30 in (Genie GS-1930) or 32 in (Skyjack SJIII 3219), narrowest lift on the yard
Overall length70 in
Stowed height80 in, or 6 ft 8 in
Extension deck3 ft rollout
Operating weight2,579 lb
Power24V DC electric, charger on board
ChargerStandard 110V outlet
TiresSolid rubber, do not mark floors
Gradeability25%, firm, level ground only
Surface ratingFirm, level slab only
Rate math

Which term to book

The day rate is $143 and the week is $287, so the week pays for itself on the second day and the rest of it is free. The 4-week rate breaks even at about 2⅓ weeks.

If there is any chance the job runs past Tuesday, book the week. Most crews just book the 4 weeks and stop thinking about it entirely.

What you get

Included with every rental

  • A current annual inspection, with the operator manual riding in the machine
  • A full function check before it leaves the yard, so nothing surprises you on site
  • A phone number that reaches the yard directly rather than a call center

Will it fit? 4 things decide it

Measure before you book
01

Doorway width

At up to 32 in wide it wants a 36 in door to pass easily, so measure the tightest point on the whole route, not just the entry. Hallway turns and lift cabs are what stop a drop off.

02

Door and ceiling height

It stands 80 in folded, or 6 ft 8 in, which clears most roll up doors and freight lifts. This is the one number that catches people out, so check it before you book the machine.

03

Floor load and surface

The machine weighs 2,579 lb on 4 small wheels and needs a firm, level slab. Check the floor rating before you go up on a second story or over a basement, because the load under each wheel is far higher than the weight spread evenly.

04

Power for charging

You need a standard 110V outlet on site to charge it overnight, and if the job has no power yet, tell us when you book and we will plan around it.

Pothole guards deploy on their own. They drop when the platform rises, and they stop the machine driving over a floor opening or off a dock edge. Never block them, and keep cords and debris out of the path they travel.

Not sure? Send us a photo of the route in and the work area, and we will tell you straight which machine to take before the truck rolls.

Battery and charging

A full charge runs a normal indoor day, or about 8 hr of lifting and driving for a crew of 2. Driving between bays uses more charge than lifting does.

Plug it in every night, because the charger is on board and runs off a standard 110V outlet. Charge it overnight and you never lose an hour of the morning.

SituationWhat to do
No power on site yetTell us when you book and we will send it fully charged and plan the return
2 shifts on 1 machineCharge it through the lunch break. An hour buys you several more cycles
Machine will not liftCheck the tilt light and the battery level first. It is almost always one of those two
Machine drives slowly when raisedDrive speed drops when the platform is up. That is normal, not a fault
Low battery light comes onDrive it to the charger. Running the batteries flat shortens their life

The guardrails are the fall protection

In a scissor lift the rails, the closed gate and both feet on the deck are the fall protection, and OSHA does not require a harness unless your own site program calls for one. A boom lift is the opposite, where a harness goes on every time.

OSHA treats a scissor lift as a mobile scaffold under 29 CFR 1926.451, with operator training under 29 CFR 1926.454 and ANSI A92.22 and A92.24. Your employer must train and authorize the operator and keep a written safe use program on site.

  • Renting does not certify anyone, and the walkthrough we give at drop off shows your crew the controls but is not a training card.
  • Inspect the machine and run a function test at the start of every shift, including the ground controls and the emergency lowering.
  • Never go past the 550 lb platform rating, because 2 people plus tools adds up fast, and the extension deck is rated lower still.
  • Keep clear of energized lines and equipment, because this machine is not insulated.
  • Work indoors only when the floor is firm and level, and nobody rides the platform while the machine is moved or hauled.
Quick quote

Work out the estimate total

Put in the ZIP the machine is going to and how long you need it. The delivery band and the estimate total come back straight away, waiver, fuel and tax included.

19 ft electric scissor lift
Rental, 1 day—
Damage waiver, 15%—
Prepaid fuel—
Delivery out, enter a ZIP—
Pickup back—
Sales tax, 9.1%—
Estimate total—

About this figure. The total carries the 15% damage waiver, prepaid fuel and 9.1% sales tax. This is an estimate rather than a quote, and we confirm the band from the full address before anything is booked.

Delivery

Zones and rates

Each way

Delivery is required on this machine and billed each way at the mid size tier.

DistanceEach wayRound trip
0 to 20 mi$95$190
21 to 30 mi$125$250
31 to 40 mi$175$350
41 to 50 mi$225$450

Past 50 mi, call us and we will quote the run to your address. Deliveries go out Monday to Friday between 3 and 11 a.m., and same day is possible when the machine is sitting on the yard. Have it ready for pickup before 7 a.m. on the day that it goes back to us.

Service area

Where we deliver

Phoenix Mesa Tempe Scottsdale Chandler Gilbert Glendale Peoria Goodyear Avondale Surprise Queen Creek Apache Junction
FAQ

Common questions

Will it fit through a standard door?

The Genie GS-1930 is 30 in wide and the Skyjack SJIII 3219 is 32 in, so either one clears a 36 in door with room to spare. A door marked 32 in often has a clear opening nearer 30 in once you allow for the stop and the hinge side swing, and that is too tight. Measure the tightest point on the route and tell us that number when you book.

Do I need a harness in a scissor lift?

Not under OSHA, as long as the rails are up and the gate is closed, because in a scissor lift the rails are the fall protection. Some general contractors ask for a harness anyway, so check your own site program before the crew arrives.

Can I use it outside?

Only on firm, level, paved ground with no wind, because this is a slab lift and not a rough terrain machine. Gravel, dirt and ungraded lots are out of bounds for it.

How long does a charge last?

A normal indoor shift, or about 8 hr of lifting and driving, and it charges from any standard 110V outlet overnight using the charger on board.

Can I pick it up myself?

No, we haul this machine both ways and that is required. Inside 20 mi it is $95 each way, so $190 for the round trip.

Will it mark a finished floor?

No, it runs on solid rubber tires that do not mark the floor, which is why we send this one into occupied shops and offices.

Related equipment

All scissor lifts
Book the 19 ft narrow

Ready to book?

You can reserve it online in about 2 min, or call the yard and we will put it straight onto the schedule.

Not sure yet

Or talk to a Summit representative

Tell us the job, the access route and the ground conditions, and we will tell you whether this is the right machine before you pay for it.

Call (602) 900-1845